Detail publikace

Graded Inconel-stainless steel multi-material structure by inter- and intralayer variation of metal alloys

Bodner, SC. Hlushko, K. van de Vorst, LTG. Meindlhumer, M. Todt, J. Nielsen, MA. Hooijmans, JW. Saurwalt, JJ. Mirzaei, S. Keckes, J.

Originální název

Graded Inconel-stainless steel multi-material structure by inter- and intralayer variation of metal alloys

Typ

článek v časopise ve Web of Science, Jimp

Jazyk

angličtina

Originální abstrakt

Additively manufactured multi-metal hybrid structures can be designed as functionally graded materials providing an optimized response at specific positions for particular applications. In this study, liquid dispersed metal powder bed fusion is used to synthesize a multi-metal structure based on Inconel 625 (IN625) and stainless steel 316L (S316L) stainless steel regions, built on a S316L base plate. Both alloys alternate several times along the build direction as well as within the individual sublayers. The multi-metal sample was investigated by optical microscopy, scanning electron microscopy, microhardness measurements, nano-indentation and energy-dispersive X-ray spectroscopy. Cross-sectional synchrotron X-ray micro-diffraction 2D mapping was carried out at the high-energy material science beamline of the storage ring PETRAIII in Hamburg. Sharp morphological S316L-to-IN625 interfaces along the sample's build direction are observed on the micro- and nanoscale. A gradual phase transition encompassing about 1 mm is revealed in the transverse direction. Mechanical properties change gradually following abrupt or smooth phase transitions between the alloys where a higher strength is determined for the superalloy. The two-dimensional distribution of phases can be assessed indirectly as S316L and IN625 in this multi-metal sample possess a <110> and a <100> fiber crystallographic texture, respectively. Tensile residual stresses of similar to 900 and similar to 800 MPa in build direction and perpendicular to it, respectively, are evaluated from measured residual X-ray elastic strains. Generally, the study indicates possibilities and limitations of liquid dispersed metal powder bed fusion for additive manufacturing of functionally graded materials with unique synergetic properties and contributes to the understanding of optimization of structurally and functionally advanced composites.

Klíčová slova

3D multi-material structure; Multi-metal material; Liquid dispersed metal powder bed fusion; Cross-sectional gradient materials; X-ray synchrotron characterization; Hybrid structures

Autoři

Bodner, SC.; Hlushko, K.; van de Vorst, LTG.; Meindlhumer, M.; Todt, J.; Nielsen, MA.; Hooijmans, JW.; Saurwalt, JJ.; Mirzaei, S.; Keckes, J.

Vydáno

1. 12. 2022

Nakladatel

ELSEVIER

Místo

AMSTERDAM

ISSN

2214-0697

Periodikum

Journal of Materials Research and Technology-JMR&T

Ročník

21

Číslo

1

Stát

Brazilská federativní republika

Strany od

4846

Strany do

4859

Strany počet

14

URL

https://www.sciencedirect.com/science/article/pii/S2238785422017756?via%3Dihub

BibTex

@article{BUT187330,
  author="Bodner, SC. and Hlushko, K. and van de Vorst, LTG. and Meindlhumer, M. and Todt, J. and Nielsen, MA. and Hooijmans, JW. and Saurwalt, JJ. and Mirzaei, S. and Keckes, J.",
  title="Graded Inconel-stainless steel multi-material structure by inter- and intralayer variation of metal alloys",
  journal="Journal of Materials Research and Technology-JMR&T",
  year="2022",
  volume="21",
  number="1",
  pages="4846--4859",
  doi="10.1016/j.jmrt.2022.11.064",
  issn="2214-0697",
  url="https://www.sciencedirect.com/science/article/pii/S2238785422017756?via%3Dihub"
}

Odpovědnost: Ing. Marek Strakoš