Evaluation of Cold Kinetic Deposition Technology

článek ve sborníku mimo WoS a Scopus

angličtina

This article deals with the possibility of using cold spray technology. For the basic sample, an aluminum plate was used as a substrate, on which a layer of copper was subsequently formed. The samples were equipped with an acoustic emission measurement sensor and were placed in a condensation chamber, where the formation of corrosion was evaluated. Corrosion testing took place in a condensation chamber under steady conditions at a temperature of 50 °C and relative humidity 100%. The samples were exposed to the internal environment of the chamber for a given time, while continuous acoustic emission measurements were performed on them. A metallographic test was performed on the individual samples after the end of the given time cycle of the test

cold spray, corrosion, condensation chamber

ŠAFL, P.; ZIMÁKOVÁ, J.; BINAR, T.; ČUDEK, P.

31. 7. 2022

Brno University of Technology

Brno

978-80-214-6088-1

Advanced Batteries Accumulators and Fuel Cells – 23rd ABAF

1

215

217

3

https://www.aba-brno.cz/download/2022-ABAF-Proceeding.pdf